Purchasing a new air vent cover or register cover? Measuring is very important!

Perplexed at how to measure your existing air vent covers? 


It's easy!  There's just three simple steps for sizing your grill, register cover or air vent cover!


1.  Always remember the size of the grill is the same size as the opening in the wall, ceiling or floor.  The size is not the outside dimension of a grill cover. 


2.  Measure the length of the opening first.  ("A" in the diagram below).


3.  The height would be the vertical top to bottom measurement.  ("B" in the diagram below).

4.  Most register manufacturers size their grills in two-inch increments.  For example:  Length ("A" in the diagram above) might be found in typical sizes ranging from 10", 12" or 14".
Height ("B" in the diagram above) might be 4", 6" or 8". Your grill size might be a little smaller or the wall opening size might be a little larger.  This is normal; it creates a loose fit in the wall for the grill.  The loose fit allows room to properly level the grill. 

Classic Grills | 247 Venture ST., Suite 100  San Marcos CA  92078  |  760-213-0427  |  Sales@ClassicGrills.com

Do I need Dampers?

Dampers, also called louvers, control the flow of air and can actually be a great way to save money on your heating costs. 


Dampers are attached to our ClassicGrills by either 2 (two) or 4 (four) Phillips screws, the total number of screws depends upon the total size of the grille, register or air vent.


Classic Grills provides dampers or louvers on all of our standard-sized air supply metal grills.  For custom sizes, just contact our Sales team for a quote by phone (760-213-0427) or email at Sales@ClassicGrills.com 


Our dampers are adjustable with each damper assembly including:

• a wheel lever for accurate air control
• a recessed face-plate that allows your new grill to fit tightly against the wall, floor or ceiling
• a 1/4" decorative face-plate on bronze custom grills, connected by 4 screws that allow for easy maintenance
• on floor grills, a sturdy inside grille to support heavy foot traffic
• on floor grills, you can request "no holes"

Classic Grills | 247 Venture ST., Suite 100  San Marcos CA  92078  |  760-213-0427  |  Sales@ClassicGrills.com

DIY Exterior Home Upgrade

Looking for a new DIY Exterior Home Project idea?

Upgrade your home's attic vents  to create a visual impact and increase curb appeal.

Attic ventilation plays an important part not only in cooling down attic space but adequate attic ventilation can actually prevent roof damage.

Your attic's vents should include:

• intake vents, located typically at the lowest part of the roof under your eaves that allow cool air to enter the attic.  
• exhaust vents, located at the highest parts of your roof that permit hot air to escape. 

Enhance the beauty of your attic intake vents by choosing one of the many custom designed grills available at ClassicGrills.

If you've surrounded your home with flowers, why not upgrade your attic's intake vents with Classic Grills custom flower designed grills? 

If your attic's intake vents run the entire length of your eave, Classic Grills offers custom made vents to fit any size, any curve you may have on your home. 

Just contact our team with any questions you may have at Sales@ClassicGrills.com 

Classic Grills | 247 Venture ST., Suite 100  San Marcos CA  92078  |  760-213-0427  |  Sales@ClassicGrills.com

DIY Home Projects - Why choose Classic Grills Resin for Air Vents, Grills or Registers?

What is the advantage of using Classic Grill's proprietary thermal resin for grills? 


Thermal resins that Classic Grills uses today were developed by NASA for use in the space industry.  These resins used by Classic Grills are a perfect fit for the architectural design industry. 

The durability and ability to create an array of designs and sizes in Classic Grill's resin sets Classic Grills apart from what is available on the market today. 


Classic Grills worked for many years to create a formulation that would be

• Thermal. (both against high and low temperatures)
• Rigid.  Being rigid is obviously critical to have in a final grill (air vent cover, register) which will not warp.
• Moldable.  Classic Grills can form the material prior to full canalization to conform to a desired radius.
• Paintable.  Paint adhesion to the grilles is truly important, especially with the temperature variation that grilles, air vents or registers are subjected to.
• Nail-able.  Classic Grills in resin have similar characteristics to wood when it is pin-nailed or screwed.
• Dimensionally Stable.  It is important that the resin does not expand nor contract with temperature variations experienced with a system as this can cause warping or a failure of adhesion to the resin surface.
• Moisture Resistant.  Classic Grill's goal is to allow our customers to use Distinguished Design Grilles for both interior and exterior applications.

Classic Grills | 247 Venture ST., Suite 100  San Marcos CA  92078  |  760-213-0427  |  Sales@ClassicGrills.com 

DIY Furniture Project using Classic Grills Art Deco Grills

Breathe new life into your cupboards or cabinets with an easy DIY furniture upgrade!


Re-invent your cupboards or cabinets by replacing their doors with custom sized grills.


Let your decorating ideas flow!


Classic Grills Art Deco Grills have replaced the sliding doors of this home's entertainment storage center.  Build something extraordinary! 

Classic Grills  |  247 Venture St., Suite 100  San Marcos, CA 92078  |  760-213-0427  |  Sales@ClassicGrills.com

Re-painting a room?

Re-painting a single room?  Or are you re-painting your whole house? 


Customize your DIY paint project with Classic Grills Distinguished Design resin grills that can be shaped, painted and finished in many ways that have never been thought of before! 


Our grilles craftsman can turn your designs into a three-dimensional reality! 

Our experienced staff can answer all your questions from how to accent your newly painted room with a painted custom resin grill to helping you with special shapes or curves to match the flow of your unique surfaces in your home. 


Feeling tropical?  Consider our tropical themed resin grille!

Feeling outdoorsy?  Try our Flower resin custom grille cover!



Feeling like a King or Queen?  We have two designs, our Caspian Cross Resin grille cover



and our Iron Ring Pattern Grille can help with those creative designs!

Sales@ClassicGrills.com  | 247 Venture St., Suite 100  San Marcos, CA  92078  |  760-213-0427

Creative uses for air return vent covers

Easy DIY home upgrades! 


How long have we seen the same old, familiar grill covering over the air vents in our home?


Is it time for a change?   Of course it is time!


Pick a topic!  What brings romance to your thoughts?


How about a reminder of the renaissance era with a special era designed air vent cover in the dining room? 


Pair that new air cover vent with roasted pork and some new culinary knives and you have created an atmosphere worth revisiting night after night! 


And it's completely do-able!  DIY project that takes just minutes to accomplish!


Transform your living area! 

Classic Grills Distinguished Design Grills offers Classic Renaissance Grilles, Registers, Return Ai Registers, Air vent Covers in rectangular and round shapes that are available in over 200 sizes. 

Classic Grills decorative heat and air conditioning grills, registers, return air register overs and air vent covers come in a variety of styles as well as assorted metals and finishes. 


Finishes include Antique Burnished Bronze, Dark Oil Rubbed Bronze Finish, a light oil Rubbed Bronze Finish and a Satin Nickel White Bronze Finish. 


Bronze grills are great for floor grill covers or can be used for ceiling vents and wall vent covers. For curved surfaces, contact our sales team at sales@classicgrills.com


Aluminum grills are an inexpensive alternative to bronze grills.  Smaller sized aluminum grills are available for floor installation. 

247 Venture St Suite 100  |  San Marcos, CA  92078  |  760-213-0427

Our Classic Grapevine Design Grills, which can be used for custom air vent covers, as registers, for return air registers and more are available in twelve popular sizes.

Our Custom Grape Vine Grill or Grape Leaf Grille is pictured above with an Air Supply Damper.


Air Supply Dampers, also called Air Supply Louvers in an air vent cover regulate airflow.


Our Air Supply Dampers (or air supply louvers) assembly for our custom designed grilles, registers and air vent covers include:  a wheel lever for accuracy when regulating air flow, a recessed face-plate that allows your new grill to fit tightly against the wall, floor or ceiling.  Floor register covers include a sturdy inside grille to support heavy foot traffic for floor vent covers.

All of Classic Grills standard-sized air supply grills include an adjustable damper.  For sizes other than our standard sizes commonly available, contact our Classic Grills Sales Team for a quote at Sales@ClassicGrills.com or call 760-213-0427.

Our DIAMOND pattern custom grill in resin is a simple design, but one that adds a delicate sophistication to a room.

The DIAMOND pattern design has been used in classical and contemporary projects as well as many other types of homes. 

Grills can be provided with or without O.B.D. Dampers.  Dampers can also be supplied separately.
Resin Grills can be provided with or without holes for screws.  Just let us know when ordering your new custom grill!


We use a proprietary thermal resin formulation in our resin grills.  Our grills can be supplied in any size, in both flat and concave or convex profiles to match the curve of a wall or ceiling.  Please visit our website at www.ClassicGrills.com for recommended painting and staining instructions.

Grill Installation - Air Registers How to Install in your home

In so many grill installations you see these days, the grill or register is just screwed to the wall or ceiling and considered complete (not). For a professional looking installation and to really soften the look, here are a couple of simple tricks that you may find helpful. After removing the old grill, clean the inside of the ceiling or wall box with a damp cloth or household cleaner. Get yourself a rattle can of flat black spray paint. Spray the inside of the ceiling or floor box to darken the background. Don’t forget to mask around the box to prevent overspray. IF you are proficient with a spray can you can shield around the box with a piece of cardboard. To install the grill or register, screw the register to the ceiling or wall with the screws provided. Next is the important step that will set your installation apart from the others. Purchase a tube of painter’s latex caulking. Apply the caulking around the edge of the grill where the grill meets the wall. With a damp paper towel smooth out the seam until it blends smoothly. This process not only softens the look it also glues the grill to the wall or ceiling, hiding any unevenness in the ceiling or wall. This is the same process high end painter’s use on baseboards and door jambs. I hope you found this information useful. I promise it will really enhance the look of your installation.

ClassicGrills.com or DistinguishedDesignGrills.com   sales@ClassicGrills.com  760-213-0427

Visit Our Websites for more info!

 

Classic Grills

and

Distinguished Design Grills

Filtered return grills available

Classic Grills is now providing filters on our air return grills. 

At this time, filtered air return grills are available in aluminum. 

We provide a 1" disposable filter and a black foam insert

The black foam insert can be washed and reused.  Replacement inserts are available through ClassicGrills.com



Our Round Custom Grills - Registers - Vent Covers, now with dampers!

Our Round Renaissance Registers (round Grills, round vent covers)

are now available with dampers as well as screens.

The dampers provide more accurate air flow control

A different design - octagon pattern custom air vent covers

Pictured below in a black finish, Octogon Grills and Registers and vent covers are available in several popular sizes.

Custom ClassicGrills Photos

We are happy to share some photos of our custom Classic Grills

Buying a Custom Air Vent Cover, Register Grill by ClassicGrills

Classic Grills custom air vents, air register covers and quality handcrafted grilles are available nationwide and in Canada! 

For a full listing of where to find a ClassicGrill Showroom or where to purchase ClassicGrills near you, visit our Showroom Directory page here:

http://www.classicgrills.com/Grill_Showrooms.html

Register grill finishes, Air Vent covers finishes....

ANTIQUE BURNISHED BRONZE

______________________________________________

DARK OIL RUBBED BRONZE

_______________________________________________

LIGHT OIL RUBBED BRONZE

________________________________________________

SATIN NICKEL WHITE BRONZE

 

Victorian Themed Grills

Personalize your indoor or outdoor living areas with our Victorian themed air vent covers, grill covers or vent covers.

Does your indoor arboretum or garden need matching grill covers over any unsightly openings?  Enhance your botanical garden walls with our Victoria themed covers.  Complete your outdoor living spaces by using our Victorian themed coverings available in a variety of sizes.

Medieval Themed Desgins - Renaissance themed home decor

Are you a fan of medieval swords, renaissance clothing, shelds, helms?  Complete yourself with all things medieval in your home with renaissance themed air vent covers, air register covers and more! 

Renaissance Grilles / Registers / Vent Covers are available in over 200 sizes in both rectangular and round shapes.

Art Deco Themed Home Decor - Modern Themed Home Decor

Shown above in aluminum....Classic Grills Art Deco themed grill

Art Deco grills have an adjustable damper and are available in several popular sizes

visit http://www.classicgrills.com/ for more information