Purchasing a new air vent cover or register cover? Measuring is very important!

Perplexed at how to measure your existing air vent covers? 


It's easy!  There's just three simple steps for sizing your grill, register cover or air vent cover!


1.  Always remember the size of the grill is the same size as the opening in the wall, ceiling or floor.  The size is not the outside dimension of a grill cover. 


2.  Measure the length of the opening first.  ("A" in the diagram below).


3.  The height would be the vertical top to bottom measurement.  ("B" in the diagram below).




4.  Most register manufacturers size their grills in two-inch increments.  For example:  Length ("A" in the diagram above) might be found in typical sizes ranging from 10", 12" or 14".
Height ("B" in the diagram above) might be 4", 6" or 8". Your grill size might be a little smaller or the wall opening size might be a little larger.  This is normal; it creates a loose fit in the wall for the grill.  The loose fit allows room to properly level the grill. 




Classic Grills | 247 Venture ST., Suite 100  San Marcos CA  92078  |  760-213-0427  |  Sales@ClassicGrills.com

Do I need Dampers?

Dampers, also called louvers, control the flow of air and can actually be a great way to save money on your heating costs. 


Dampers are attached to our ClassicGrills by either 2 (two) or 4 (four) Phillips screws, the total number of screws depends upon the total size of the grille, register or air vent.


Classic Grills provides dampers or louvers on all of our standard-sized air supply metal grills.  For custom sizes, just contact our Sales team for a quote by phone (760-213-0427) or email at Sales@ClassicGrills.com 


Our dampers are adjustable with each damper assembly including:
  • a wheel lever for accurate air control
  • a recessed face-plate that allows your new grill to fit tightly against the wall, floor or ceiling
  • a 1/4" decorative face-plate on bronze custom grills, connected by 4 screws that allow for easy maintenance
  • on floor grills, a sturdy inside grille to support heavy foot traffic
  • on floor grills, you can request "no holes"
Classic Grills | 247 Venture ST., Suite 100  San Marcos CA  92078  |  760-213-0427  |  Sales@ClassicGrills.com